作者  ：ildesign  |
Posted：2005-08-18 21:42 | |
 |
小弟我是用p4r800這塊主機版，常常會無故跳到藍色畫面。畫面內容如下…有那位好心的大大可否幫我看一下是啥意思…這個問題己困擾我很久了。尤其是玩關於3D方面的game時…愈會發生…
A problem has been detected and windows has been
shut down to prevent damage to your computer .
The problem seems to be caused by the following file:ati2dvag.dll
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen ,
restart your computer . If this screen appears again , follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation , ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue, disable or remove any newly installed
hardware or software. Disable BIOS memory options such as caching
or shadowing . If you need to use safe Mode t remove or
disable components. restart your computer. press F8 to select
Advanced startup options, and then select safe Mode.
STOP:0x00000050(0xEC7F800B,0x00000000,0xBF053A61,0x00000000)
ati2dvag.dll-Address BF053A61 base at BF025000.Datesamy 42c20f38
Beginning dump of physical memory
Physical memory dump complete.
compact your system administrator or technical support
group for further assistance
另外小弟我的電腦配備是p43.0GHZ. ram是512…
|
|
| |
：訪客 |
Posted：2005-08-20 12:08:00 |
| |
| |
Hello,
I have brought this mother board in HK last year. At first, I use two 256M Corsair DDR400 (single side) for this board. But it is very unstable. Keyboard will lock. Machine will reboot ...
At last, I have pass the RAM to the maintenance guy. Then, they replace the RAM with another 256M DDR400 (double side). It works perfectly now!
I try to put two Kingston 512M DDR400 (double side) in the board last week. But the problem comes back. Therefore, there is no way to upgrade the memory now ... so poor.
|
|
| |
：訪客 |
Posted：2005-10-16 23:33:00 |
| |
|
| |
：訪客 |
Posted：2005-10-26 00:28:00 |
| |
|
| |
：訪客 |
Posted：2005-10-28 02:27:00 |
| |
|
|
|
請問這個藍色畫面代表的意思???? 
