作者  ：243  |
Posted：2004-10-24 09:50 | |
 |
== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-C2612 E: CDRom0
TEAC DV-W58D G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261652kB)
Free physical memory: 60MB (61988kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.10.2004
ISO編製
下午 10:52:54 #1 Text 0 File Isodoc.cpp, Line 5805
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
下午 10:52:55 #2 Text 0 File Reader.cpp, Line 118
Reader running
下午 10:52:55 #3 Text 0 File Writer.cpp, Line 127
Writer TEAC DV-W58D running
下午 10:52:55 #4 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)
下午 10:52:55 #5 Text 0 File Burncd.cpp, Line 3176
Turn on 光碟一次燒錄(DAO), using DVD media
下午 10:52:59 #6 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 724271 (160:56.71)
下午 10:52:59 #7 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE
下午 10:52:59 #8 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: TEAC DV-W58D, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R02, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
下午 10:52:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 8752 (8752) = #8752/1:56.52
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 8752 blocks [TEAC DV-W58D ]
--------------------------------------------------------------
下午 10:53:00 #10 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [TEAC DV-W58D ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 18231296, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
715370 | lead-in | 0 | 0x00 | 0x41
715370 | 2 | 0 | 0x00 | 0x41
715520 | 2 | 1 | 0x00 | 0x41
724272 | lead-out | 1 | 0x00 | 0x41
下午 10:53:00 #11 Phase 24 File dlgbrnst.cpp, Line 1843
檔案暫存作業開始
下午 10:53:01 #12 Phase 25 File dlgbrnst.cpp, Line 1843
檔案暫存作業完成
下午 10:53:01 #13 Phase 36 File dlgbrnst.cpp, Line 1843
以4x (5,520 KB/s)的速度開始燒錄
下午 10:53:01 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #715520
下午 10:53:01 #15 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 01 52 49 54 45 4B 00 - 00 00 52 30 32 01 38 23 ..RITEK...R02.8#
54 37 09 00 3C 65 00 A0 - 5F 14 14 0A 0A 0A 0A 01 T7.. 19 1B 0B 0B 0E 0F 01 00 - 00 00 00 00 00 00 00 01 ................
下午 10:53:01 #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:35,680 (35680ms) -> OK
下午 10:53:01 #17 Text 0 File DVDPlusRW.cpp, Line 560
Start write address at LBA 715520
DVD high compatibility mode: No
下午 10:53:03 #18 Text 0 File Writer.cpp, Line 318
22:53:03.771 - TEAC DV-W58D : Queue again later (Intervall : 11msec)
下午 10:53:24 #19 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 724272 (B0D30h), lenght 0 blocks
下午 10:53:24 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
下午 10:53:26 #21 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00
下午 10:53:26 #22 SCSI -1176 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x03
下午 10:53:26 #23 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
下午 10:53:26 #24 CDR -1066 File ThreadedTransferInterface.cpp, Line 1626
無效的指令欄位
TEAC DV-W58D
|
|
| |
：訪客 |
Posted：2004-10-25 00:01:00 |
| |
| |
應該可以ㄅ~我速用萊德DVD+R 4X 燒錄~還ㄅ錯ㄋ
|
|
| |
：訪客 |
Posted：2004-11-15 21:45:00 |
| |
|
| |
：訪客 |
Posted：2004-11-15 22:54:00 |
| |
| |
有更新了韌體(韌體更新為1.13)和用nero 6燒錄軟體 (韌體更新為 nero6601 英文版), 己燒錄(DVD+RW DVD+R ) 成功
243
|
|
|
|
不能燒錄DVD+R 
