|
:訪客 |
Posted:2004-09-12 12:35:00 |
|
|
這主機板好像沒支援DDRRAM .去技嘉網站查一下吧.現在DDR都是400.333如果是DR的主機板會降到266跑 不如換有支援DDR400的主機板.而且PC-133的RAM跟DDR400.333的價錢沒擦多少.你的方案1不划算.DDR哪家較好應該要看他的顆粒在說(X強.X元.X達保固一年掛的機率也很高.都是代理商沒自已在做)不要考慮.
其他都還不錯
|
|
|
:訪客 |
Posted:2004-09-12 17:31:00 |
|
|
Re:
1.再買一支中古SDRAM PC133 512MB( ~NT 2000_2300)...128MB那隻賣掉!
OC拍賣者天堂:
http://www1.oc.com.tw/ocbid/msglist.asp?status=&id=A04
2.可以跑 DDR 226 買512MB!
http://chinese.giga-byte.com/MotherBoard/Products/Products_GA-7DX.htm
....GA-7DX MB has DDR DIMMs of 184-pin sockets
...Supports up to 2GB of either PC2100/DDR266 or PC1600/DDR200
3.CPU support:http://chinese.giga-byte.com/Motherboard/Support/CPUSupportList/CPUSupportList_GA-7DX.htm
AMD AthlonXP 2200+ ; 2400+ ;
AthlonXP 2600+(.13u) 266 <-------這棵是Thoroughbred (L2 256KB)2133MHz ,不是巴頓...但是效能接近Barton 2600+
4.那一家的DDR RAM比較好換...創見 ^_^
|
|
|
:gogogogo |
Posted:2004-09-12 19:15:00 |
|
|
DDR沒133
不過266說起來其實也是133啦
上緣下緣同時觸發~~應該吧
所以才雙向
|
|
|
:s854106 |
Posted:2004-09-12 19:29:00 |
|
|
可以跑 DDR 226 買512MB
現在是兩支128 MB
把舊的換到,直接換一條 DDR266 521MB
需要從新設定什麼嗎?
|
|
|
:s75830 |
Posted:2004-09-12 19:46:00 |
|
|
建議...
把你舊的CPU..主機板...RAM...這一些拿到ebay拍賣 賣掉..
再重新組一台..這樣會比較好..
看你的金錢如何...
如果要便宜的有便宜的組法..效能還不錯
1萬元以內的話
CPU-XP2600+ $2950
主機板-GA-7VM400AM(F) $2100
RAM-金士頓DDR400 256*1 $1400
顯示卡-內建MX440有15PIN插頭
網路卡-內建
音效卡-內建
硬碟-W.D80G-2M $2250
(看要用以前的還是買新的)
CD-ROM-用以前的
滑鼠鍵盤-用以前的
POWER-七盟300W $900
機箱-自選- $約1200
(請勿使用機箱所附贈的POWER以免硬體損毀...當機..等等)
|
|
|
:s854106 |
Posted:2004-09-12 22:27:00 |
|
|
|
:s75830 |
Posted:2004-09-12 22:51:00 |
|
|
|
:訪客 |
Posted:2004-09-12 22:55:00 |
|
|
呵呵呵,第一次聽到ddr有133的呢
那是SDR133啦,想跑DDR266那是想太多了,一個是168PIN,一個是184PIN怎插Y
建議...
不想花太多錢買個SDR133.256MG OR 512MGRAM
就好了.
再不然可能就要換主機板跟RAM了,其他的看你自己了
我只跟你說哦,千萬別跟別人說
|
|
|
:s854106 |
Posted:2004-09-13 09:31:00 |
|
|
查的資料.....
DDR 184 PIN內容看不太懂....
M368L1713CT1
16Mx64 DDR SDRAM 184pin DIMM based on 16Mx8
Downloads
General Description
The Samsung M368L1713CT1 is 16M bit x 64 Double Data Rate SDRAM high density memory modules based on first gen of 128Mb DDR SDRAM respectively.
The Samsung M368L1713CT1 consists of eight CMOS 16M x 8 bit with 4banks Double Data Rate SDRAMs in 66pin TSOPII(400mil) packages mounted on a 184pin glass-epoxy substrate. Four 0.1uF decoupling capacitors are mounted on the printed circuit board in parallel for each DDR SDRAM. The M368L1713CT1 is Dual In-line Memory Modules and intended for mounting into 184pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operating frequencies, programmable latencies and burst lengths allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
Features
Performance Range
Part No. Max Freq. Interface
M368L1713CT1-C(L)B0 133MHz(7.5ns@CL=2.5) SSTL_2
|
|
|
:訪客 |
Posted:2004-09-19 03:38:00 |
|
|
我覺得創見記憶起跟技嘉版有仇!
因為收到好多我朋友不相容問題!!
|
|
|